Plumbing pipe curtain rods

When deciding on curtain rods for Jaxson's room, I just couldn't find anything that really caught my eye.  I knew I wanted something different, but also didn't want to spend a fortune.  This is where Pinterest came in handy (yet again!) and I stumbled across how to make curtain rods out of plumbing pipe fittings.  Drew Babe thought my idea was a little crazy, but he said I could give it a try (he always puts up with all my crazy ideas!....best husband ever!).

I somewhat followed this tutorial with a few modifications.  Everything, except the floor flanges were found in the plumbing section at Home Depot.

Here are the supplies I used:

• 4- 1/2" floor flanges (I ordered these on Ebay for just over $3 a piece.  This was tons better than paying $9.95 per piece at Home Depot or Lowe's.)
• 4- 1/2" x 3 1/2" nipples
• 4- 1/2" 90 degree elbows
• 1- 1/2" 10 ft long galvanized pipe (Home Depot cut it in half for me for free.)
• 4 packs of curtain ring clips

This is definitely a two person job, because after all the pieces are together, the curtain rod is quite heavy.  

We put the entire rod together, along with the curtain ring clips, and then mounted it on the wall.  Because Drew is much more of a perfectionist than I am, he did all the measuring and leveling.  I think Drew used anchors with the screws, just to make sure there wasn't any chance of the rod falling out of the wall.

We like to hang our curtains and blinds "high and wide."  It definitely gives the illusion of a much larger window and taller ceilings.

The last time we went on our annual Ikea trip, we purchased these simple white curtains for the nursery.  After the rod was installed, we simply had to clip on the curtains.

This was definitely one of the easier projects (thank goodness!...if only every DIY home project could go exactly as planned) in the nursery, and we love the modern-industrial look of the curtain rod.

Sheets to curtains

A while back, I found a cute sheet set on clearance at one of my favorite places, Target.  The colors and pattern were just what I was looking for to go in the music room.

Well, the sheets sat there for days weeks months before I finally decided to turn them into curtains for the music room.  I only bought a twin set, so the curtain panels came out kind of skinny and are more just for "show."  I simply cut the flat sheet into 3 equal sections and used iron on hem tape for the hem.  I'm a cheater.  I pretty much only know how to sew a button.  The hem tape seemed to work just fine for this project though.

For around $2.33 per panel, I don't think they look too bad.  I also found the rods on clearance at BB&B for $10.

Instead of having 4 super skinny panels, I just decided to create 3.  So now there is simply a single panel on the smaller window.  Maybe if I get real ambitious and decide I need another panel on this window, I'll see what I can do with the fitted sheet....but that's a big maybe.

Oh, and here is a little "before" and "after:"

I'd still love to paint the walls a nice gray....one day.

Daily Double

You have pretty much hit the jackpot with this post, because it is actually 2 posts in 1!  The reason for this is because we didn't take any "after" pictures of our new family room curtains without capturing our newly finished family room accent tables as well....soooo we had to include it all in one :)
(we are still working on being sure to get all the "before" and "after" pictures.  Drew is much better about it than I am.)

Here is a true before picture of our family room.  No picture frames.  No wall shelf.  No curtains.  Pretty boring and kinda gloomy if you ask me.

(Make sure you notice the wood tables and naked bare window, because they will look completely different by the end of this post)

The loooonng window definitely needed something to make it look more finished.  To bring more white into the room, we decided simple white panel curtains would be the best for this window.

We scored a pair of white curtains for our family room on our Ikea adventure.  We purchased the Lenda style curtains for only $29.99 a pair!  They have a linen like texture and we were able to hem them to the exact length we needed (just skimming the floor) with Ikea's iron-on hem strip.  Super easy and super perfect!

(Please excuse the pillows.  I am normally pretty good about fluffing them:)

To tie in the darker accents in the room, we found an oil rubbed bronze curtain rod at Bed, Bath, & Beyond (where we still had wedding gift cards and coupons).  Drew Babe hung the rod close to the ceiling to make our ceilings appear taller and to lengthen the window.  I usually go with "high and wide" when hanging curtains (this blog has some great tips on hanging curtains).

Often it seems during some of our Martin House projects I am simply the one giving orders directions, and making sure things are straight or even, but with our curtain project I got to iron (and hem) the curtains all by myself.  Here is proof of me trying to be a good wifey:

Now....I have to switch gears a bit.

After purchasing the white curtains, we realized they were going to be the only white item in the family room.  There needed to be something else to tie them in.  We had talked about looking for new coffee and accent tables, but we actually really liked the style of ours, just not the color.  We tossed out the idea of staining them, but then I suggested painting them white to go with the curtains.  At first, Drew was a little unsure about the idea.

We certainly did not want them to stick out like a sore thumb, so we had to be sure to pick the perfect white.  That was no easy task.  After bringing home dozens of whites, looking at them in daylight and artificial light, and comparing them to various other "whites" in our house, we finally settled on Crumb Cookie from Lowe's in a semi-gloss.

We hauled the three tables out to the garage to begin the project.  Our first step was to remove all the legs to make it easier to get good paint cover.

The most tedious task was sanding them down.  To make this step of the project more exciting, we worked on this together (Drew Babe with his pro electric sander and me with my little square of sand paper).  We enjoyed laughing, chatting, and singing (sometimes to spice it up even more, I would break out into spontaneous dancing, and I am no dancer by any means).

To get all the dust off we wiped everything down with a warm damp rag.

On to the primer!  Fortunately we already had a gallon of primer and simply applied 1 (or 2...I can't remember) even coats of the primer.

The primer was super bright white, so we were hoping our Crumb Cookie would not come out looking like that.  We were going for a little bit warmer, but not yellowy, white.

Drew thought it would be a great idea to get a picture of the table with half primer and half Crumb Cookie to really show the color difference.  Fortunately we didn't have to make numerous trips to Lowe's to tweak our paint, because as you can see, the white color came out perfect!

After doing the final coat on all the tables, we let it dry for a day or two.  Drew Babe wanted to give the top of the tables a stronger finish and decided to apply a couple coats of spray enamel.  It turned out really well and they are super easy to clean.

Here is the finished room with the white curtains and the white tables.

 Having the white tables and the white curtains helps to brighten the whole room and make it feel lighter and fresh...if you know what I mean (Drew always says I have the most interesting adjectives when I describe decorating things).

We both love our new brighter and whiter family room.  I may even change up the pillows on the couch sometime to make them pop a bit more.  For a long time I was so afraid to decorate with white, because sometimes it can be so stark.  Now I am finding I love white more and more, and there are definitely ways to make it warm and cozy :)

Progress in the Kitchen

Even before our wedding, Drew Babe started working on the kitchen.  Originally, the kitchen had faux wood laminate counters,  like in the picture here.  Actually, I shouldn't even say "faux" because that makes it sound chic, and this kitchen started out far from being chic.  I'm sure in the 1970's it looked quite nice, but we are going for a more 2011-ish kinda look.

So, our first step was to rip out the fake wood counters and install (with the help of Uncle Wayne) new laminate counters, just like these.  We also put in a new deeper black sink in place of the old shallow stainless one.  

Because we know the kitchen is everyone's favorite hang out spot, we wanted to make it was open as possible.  Originally, the counter up against the wall (now known as "the peninsula") used to be an island, sticking out into the middle of the kitchen and cutting it in half (unfortunately we forgot to take those before pics...I promise we really are working on that).  When we ripped up the island and turned it to be placed up against the wall, it was a perfect fit!  We did have someone extend the back to make it a few inches deeper, because we can always use more storage space.

To open the kitchen up even more, I asked Drew Babe if we could remove that decorative scroll-y wood piece above the window.  After he ripped that wood piece out, I immediately thought removing the wood shelves on either side of the window would make it look more modern (see why the Martin honey-do list is never ending...poor Drew).  We both loved the new open window!

Next came the daunting and tedious task of painting the cabinets.  We, actually Drew, began by removing all the doors and drawers, so we could more easily sand them down.  We sanded and wiped them clean, and then applied three coats of primer.  For the final coat of paint we went with Sherwin-Williams ProClassic trim and door paint, in a gloss Pure White color.  We had heard horror stories of people trying to cover their wood cabinets with white paint, but thankfully our cabinet project went smoothly, most likely because of Drew Babe's meticulousness and patience.

You might notice the hardware seems different as well.  I found the oil rubbed bronze knobs on Ebay for a little over $1 a piece.  Tons cheaper than the Lowe's or Home Depot price.

The hinges used to be an old brassy color.  Instead of spending well over $100 on new hinges, I suggested we try to paint them.  Drew was a little wary of this idea, because painting a metal contraption with lots of moving parts can be tricky.  We took our time and used our new favorite, (thanks to Young House Love) oil-rubbed bronze Rust-oleum spray paint, to paint all those little jaspers.  They turned out great and even after opening and shutting the cabinets countless times, the paint has stayed the same.

After we removed the scroll-y wood thing from above the window, it left a tiny fluorescent light for all the world to see.  Drew Babe used his electronic tech skills to install a new pendant light above the sink.  At night it gives off such a cozy, homey glow.

The first night of having the light installed, we both couldn't get over the beautiful glow coming from the light.  I bet we stood there for more than a couple minutes just staring at the light and pondering deep thoughts (well, maybe not that last part, but we definitely stared at it).

Drew Babe installed the white shelves above our "peninsula" as a surprise for me.

Still to do:

• New curtain above the sink.  I already have the fabric, so step one of that project is done!
• New floors.  Eventually we would like laminate wood floors throughout the kitchen, family room, and hall.
• New appliances.  The creamy stove really just throws off the crisp and clean look of the cabinets.  We are probably going to go with stainless and have already looked at some.  Still waiting for a great deal.
• I would also like to paint the wall and slightly different green color.  Less minty and more apple-y.  That may happen way down the road.